View ICPL2533_480736.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ICPL2533
HIGH SPEED DUAL CHANNEL OPTICALLY COUPLED ISOLATOR PHOTOTRANSISTOR OUTPUT
APPROVALS l UL recognised, File No. E91231 DESCRIPTION These dual channel diode-transistor optocouplers use a light emitting diode and an integrated photon detector to provide 2500Volts RMS electrical isolation between input and output. Seperate connection for the photodiode bias and output transistor collector improve the speed up to a hundred times that of a conventional photo-transistor coupler by reducing the base-collector capacitance. FEATURES l High speed - 250k b/s NRZ l High Common Mode Transient Immunity 1000V/s l TTL Compatible l Open Collector Outputs l 2500V RMS Withstand Test Voltage,1 Min l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l Line receivers l Pulse transformer replacement l Wide bandwidth analog coupling l Output interface to CMOS-LSTTL-TTL
2.54 1 6.9 6.3 2 3 4 1.3 9.7 9.1 4.0 3.6 0.5 3.3 0.5 1.3
Dimensions in mm 8 7 6 * 7.62 5
* ICPL2531 NOISE SHIELD
0.3
15 Max
ABSOLUTE MAXIMUM RATINGS (25C unless otherwise specified) Storage Temperature -55C to + 125C Operating Temperature -55C to + 100C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260C INPUT DIODE Average Forward Current Peak Forward Current ( 50% duty cycle, 1ms pulse width ) Peak Transient Current (equal to or less than 1s P.W., 300 pps) Reverse Voltage Power Dissipation DETECTOR Average Output Current Peak Output Current Supply Voltage Output Voltage Power Dissipation 8mA 16mA -0.5 to +30V -0.5 to +20V 35mW( 4 ) 25mA ( 1 ) 50mA ( 2 ) 1.0A 5V 45mW( 3 )
OPTION SM
SURFACE MOUNT
OPTION G 7.62
1.2 0.6 10.2 9.5
1.4 0.9
0.3 10.16
ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581
7/12/00
ISOCOM INC 1024 S. Greenville Ave, Suite 240, Allen, TX 75002 USA Tel: (214) 495-0755 Fax: (214) 495-0901 e-mail info@isocom.com http://www.isocom.com
DB91038-AAS/A3
ELECTRICAL CHARACTERISTICS ( TA= 0C to 70C Unless otherwise noted ) PARAMETER SYM DEVICE MIN TYP* MAX UNITS 15 21 % TEST CONDITION IF = 8mA, VO = 0.5V, VCC = 4.5V, TA= 25C IF = 16mA, VO = 0.5V, VCC = 4.5V, TA= 25C IF = 8mA, VO = 0.5V, VCC = 4.5V IF = 16mA, VO = 0.5V, VCC = 4.5V IF = 8mA, IO=0.7mA, VCC = 4.5V IF = 16mA, IO=1.1mA, VCC = 4.5V IF1= IF2=0mA,TA= 25C, VO1 = VO2 = VCC = 5.5V IF1 = IF2= 0mA, VO1 = VO2 = VCC = 15V IF1= IF2=8mA,VCC=5.5V, VO1 = VO2 = open IF1= IF2=16mA,VCC=5.5V, VO1 = VO2 = open IF1= IF2= 0mA,VCC=5.5V, VO1 = VO2 = open IF = 8mA, TA= 25C IF = 16mA, TA= 25C IF = 8mA IF = 16mA IR = 10A,TA= 25C f = 1MHz, VF = 0 R.H.equal to or less than 50%, t = 1min. TA= 25C V = 500V dc f = 1MHz 45 % Relative Humidity t = 5s, V = 500V dc VI-I = 500V dc f = 1MHz
DB91038-AAS/A3
12 Current Transfer Ratio (note 5,6 ) CTR 11
19
%
14
%
9
12 0.2 0.5 0.5
% V V
Logic Low Output Voltage (note 5 )
VOL
0.2
0.02 Logic High Output Current (note 5 ) IOH
500
nA
A A A A
V V
50
40 Logic Low Supply Current ICCL 80
Logic High Supply Current
ICCH
0.05 1.5
4 1.7 1.7
Input Forward Voltage (note 5 ) Temperature Coefficient of Forward Voltage (note 5 ) Input Reverse Voltage (note 5 ) Input Capacitance (note 5 ) Input-output Isolation Voltage (note 7)
VF
1.5 -1.6 -1.6
VF TA
mV/C mV/C V
VR CIN VISO
5 60 2500 5000 1012
pF VRMS
Resistance (Input to Output)(note 7) RI-O Capacitance (Input to Output)(note7) CI-O II-I Resistance (Input to Input)(note8) Capacitance (Input to Input)(note8)
7/12/00
pF
A
R CI-I
1011 0.25
pF
*All typicals at TA= 25C
SWITCHING SPECIFICATIONS AT TA = 25C ( VCC = 5V Unless otherwise noted ) PARAMETER SYM DEVICE MIN TYP MAX UNITS 0.8 Propagation Delay Time to Logic Low at Output ( fig 1 ) tPHL 0.3 1.0 Propagation Delay Time tPLH to Logic High at Output ( fig 1 ) 1.1 1000 Common Mode Transient Immunity at Logic High Level Output ( fig 2 ) CMH 1000 -1000 Common Mode Transient Immunity at Logic Low Level Output ( fig 2 ) CML -1000 2.5 1.5 2.5
s s s
TEST CONDITION IF = 8mA,RL= 7.5k (note 10 ) IF = 16mA,RL= 4.7k, (note11 ) IF = 8mA,RL= 7.5k, (note 10 ) IF = 16mA,RL= 4.7k, (note11 ) IF = 0mA, VCM = 10VPP RL= 7.5k,(note9,10 ) IF = 0mA, VCM = 10VPP RL = 4.7k,(note9,11 ) IF = 8mA,VCM = 10VPP RL = 7.5k,(note9,10 ) IF = 16mA,VCM= 10VPP RL = 1.9k,(note9,11 )
1.5
s
V/s V/s V/s V/s
NOTES:1. Derate linearly above 70oC free air temperature at a rate of 0.8 mA/C. 2. Derate linearly above 70oC free air temperature at a rate of 1.6 mA/C. 3. Derate linearly above 70oC free air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70oC free air temperature at a rate of 1.0 mW/C. 5. Each channel . 6. CURRENT TRANSFER RATIO is defined as the ratio of output collector current,IO , to the forward LED input current, IF times 100%. 7. Device considered a two-terminal device: pins 1,2,3,and 4 shorted together and pins 5,6,7,and 8 shorted together. 8. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. 9. Common mode transient immunity in Logic High level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse VCM to assure that the output will remain in a Logic High state (i.e. VO > 2.0V). Common mode transient immunity in Logic Low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM to assure that the output will remain in Logic Low state (i.e. VO< 0.8V). 10. The 7.5k load represents 1 LSTTL unit load of 0.36mA and a 20k pull-up resistor. 11. The 4.7k load represents 1 LSTTL unit load of 0.36mA and a 8.2k pull-up resistor. 12. The 2500 VRMS / 1minute capability is validated by a factory 3.1k VRMS / 1 second dielectric test.
FIG.1 SWITCHING TEST CIRCUIT
PULSE GENERATOR ZO = 50 tr = 5ns 0 5V 1.3V tPHL tPLH 1.3V VOL IF Monitor 100
7/12/00
IF 1 2 3 4 8 7 6 5 CL = 15pF
DB91038-AAS/A3
IF VO
10% Duty Cycle 1/f < 100s
5V RL VO
FIG. 2 TEST CIRCUIT FOR TRANSIENT IMMUNITY AND TYPICAL WAVEFORMS
VCM 0V VO VO
10V 90% 10% tr tf 5V B VFF 10% 90% A
IF
1 2 3 4 VCM + -
8 7 6 5
5V RL VO
SWITCH AT A: IF = 0mA SWITCH AT B: IF = 16mA
VOL
PULSE GEN.
Normalized Current Transfer Ratio vs. Forward Current (nA) 1.6 1.5 Normalized current transfer ratio 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 1 Normalized to IF = 16mA VO = 0.5V VCC = 5V TA = 25C 2 5 10 20 50 101
Logic High Output Current vs. Ambient Temperature IF = 0mA VO = VCC = 5V
OH
Logic high output current I
10
0
10-1
10-2
10-3 -55 -25 0 25 50 75 100 Ambient temperature TA ( C ) Normalized Propagation Delay vs. Ambient Temperature 1.5 1.4 Normalized propagation delay 1.3 1.2 1.1 1.0 0.9 0.8 0.7 -25 0 25 Normalized to IF = 16mA VCC = 5V RL = 4.7k TA = 25C 50 70 tPLH tPHL
Forward current IF (mA) Normalized Current Transfer Ratio vs. Ambient Temperature 1.3 Normalized current transfer ratio 1.2 1.1 1.0 0.9 0.8 0.7 Normalized to IF = 16mA VO = 0.5V VCC = 5V TA = 25C -55 -25 0 25 50 75 100 Ambient temperature TA ( C )
7/12/00
Ambient temperature TA ( C )
DB91038-AAS/A3

▲Up To Search▲

Price & Availability of ICPL2533

	To Download ICPL2533 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .